Roof Pitch Calculator
Pitch, Angle, Slope % & Rafter Length
A 6/12 pitch rises 6 inches for every 12 inches of horizontal run — an angle of 26.57°, a 50% slope and a pitch multiplier of 1.118. Enter your rise and run below to get your pitch, angle, slope, multiplier, rafter length and true roof area. Updates as you type.
Common pitches — tap to load:
For a standard gable roof, each rafter's horizontal run is half the building width.
The flat plan area the roof covers — length × width of the building, before slope.
Your pitch updates as you type. Nothing is stored — the calculation runs in your browser.
Your Roof Pitch
6/12
26.57° · 50.0% slope
Pitch multiplier (slope factor)
1.118
Multiply flat lengths and areas by this to get true sloped values.
The formulas
Pitch = rise ÷ run × 12
Angle = arctan(rise ÷ run)
Multiplier = √(1 + (rise ÷ run)²)
Rafter length — 30 ft wide building
16.77 ft (16 ft 9.2 in)
Half-width run of 15.0 ft × 1.118. Excludes overhang and ridge-board deduction.
Roof area — 1500 sq ft footprint
1,677 sq ft
≈ 16.8 roofing squares (1 square = 100 sq ft), before waste allowance.
The full chart
Roof pitch chart: 1/12 to 12/12
Every standard pitch with its angle, slope percentage and multiplier — and what each pitch is typically used for. Two code landmarks to remember: 2/12 is the floor for metal roofing, and 4/12 is the minimum standard pitch for asphalt shingles under the IRC.
| Pitch | Angle | Slope | Multiplier | Typical use |
|---|---|---|---|---|
| 1/12 | 4.76° | 8.3% | 1.003 | Nearly flat — membrane or standing-seam metal only, never shingles |
| 2/12 | 9.46° | 16.7% | 1.014 | Minimum for metal roofing; shingles only with double underlayment (IRC) |
| 3/12 | 14.04° | 25.0% | 1.031 | Low slope — metal, or shingles with double underlayment |
| 4/12 | 18.43° | 33.3% | 1.054 | Minimum standard pitch for asphalt shingles (IRC) |
| 5/12 | 22.62° | 41.7% | 1.083 | Common on porches, sheds and modest homes |
| 6/12 | 26.57° | 50.0% | 1.118 | The most common residential pitch in the US |
| 7/12 | 30.26° | 58.3% | 1.158 | Steep — classic Cape Cod and northern homes |
| 8/12 | 33.69° | 66.7% | 1.202 | Steep — sheds snow well; walkable only with care |
| 9/12 | 36.87° | 75.0% | 1.250 | Very steep — strong snow-shedding, roof jacks recommended |
| 10/12 | 39.81° | 83.3% | 1.302 | Snow-country pitch; roof jacks needed to work on it |
| 11/12 | 42.51° | 91.7% | 1.357 | Near 45° — dramatic gables and chalets |
| 12/12 | 45.00° | 100.0% | 1.414 | A true 45° angle — A-frames and steep gables |
The 6/12 row is highlighted — it is the most common residential pitch in the US.
Measure it safely
How to measure roof pitch from the attic
You do not need to climb onto the roof. From inside the attic, the underside of any rafter gives you the exact pitch with two household tools — a level and a tape measure:
- 1. Hold the level horizontally against the underside of a rafter, with one end touching the rafter.
- 2. Mark 12 inches along the level, measured from the point where the level meets the rafter. That 12 inches is your run.
- 3. Measure straight up from your mark to the underside of the rafter. That vertical distance is the rise — 6 inches of rise over the 12-inch run means a 6/12 pitch.
The maths behind every number on this page: pitch = rise ÷ run × 12, angle = arctan(rise ÷ run), slope % = rise ÷ run × 100 and pitch multiplier = √(1 + (rise ÷ run)²). Rafter length is the horizontal run multiplied by the multiplier, and true roof area is the footprint area multiplied by the same factor.
Planning the build? Pair this with the Board Foot Calculator and the Concrete Calculator.
Done-for-you
Want a tool like this on your own website?
WebStore Pro builds fast Full Stack websites and custom calculators that rank — designed, built and SEO-ready from day one.
Prefer email? neilsonsmarry@gmail.com · Or browse our services , board foot calculator, concrete calculator, square feet calculator and free tools.
FAQ
Roof pitch questions, answered
How do you calculate roof pitch?+
Pitch is the rise divided by the run, expressed as inches of rise per 12 inches of horizontal run. Divide rise by run and multiply by 12: a roof that rises 6 inches over a 12-inch run is a 6/12 pitch. The angle is arctan(rise ÷ run) — 26.57° for a 6/12 pitch.
What is the most common roof pitch for a house?+
6/12 is the most common residential roof pitch in the United States — a 26.57° angle and a 50% slope. Most homes fall between 4/12 and 9/12: steep enough to shed water and snow reliably, shallow enough to build affordably and walk on with care.
What is the minimum roof pitch for asphalt shingles?+
Under the International Residential Code (IRC), asphalt shingles need at least a 2/12 pitch, and between 2/12 and 4/12 they require a double layer of underlayment. 4/12 is the practical minimum for a standard shingle installation; below 2/12, use standing-seam metal or a membrane roofing system instead.
How do I measure my roof pitch from the attic?+
Take a level (24 inches is ideal) and a tape measure into the attic. Hold the level horizontally against the underside of a rafter and mark 12 inches along the level from the point where it touches the rafter. From that mark, measure straight up to the rafter — that vertical distance is the rise, so a 6-inch measurement means a 6/12 pitch. No ladder or roof climb needed.
What is a roof pitch multiplier (slope factor)?+
The pitch multiplier converts flat, horizontal measurements into true sloped ones: multiplier = √(1 + (rise ÷ run)²). For a 6/12 pitch it is 1.118. Multiply a roof's footprint area by the multiplier to get the actual roof area for ordering shingles, and multiply a rafter's horizontal run by it to get the rafter length.
Is the Roof Pitch Calculator free? Is my data stored?+
Yes, completely free with no sign-up. Your measurements are processed in your browser only — nothing is sent to or stored on our servers.
Results are planning estimates. Verify measurements on site — and your local code requirements — before ordering materials or cutting rafters.
